2S10AF4 iflying tower 2S 4-in-1 yombane F411 mini yolawulo lokubhabha edityanisiweyo OSD/BEC

Udidi lweMveliso: Izinto zokudlala zombane

Udidi lwezinto zokudlala: into yokudlala yombane

F411 Flying tower imiyalelo

Imiyalelo yokusetyenziswa (ufundo olufunekayo)

Mininzi imisebenzi yokudibanisa ulawulo lwendiza kunye namacandelo axineneyo.Musa ukusebenzisa izixhobo (ezifana nepleyiti yeempumlo zenaliti okanye imikhono) ukujija amandongomane ngexesha lofakelo.Oku kunokubangela umonakalo ongeyomfuneko kwi-hardware yenqaba.Indlela echanekileyo kukucinezela i-nut ngokuqinileyo ngeminwe yakho, kwaye i-screwdriver inokukhawuleza ukuqinisa i-screw ukusuka ezantsi.(Khumbula ukuba ungaqini kakhulu, ukuze ungonakalisi iPCB)

Musa ukufaka i-propeller ngexesha lofakelo kunye nokugunyazisa ulawulo lwe-flight.Ngaphambi kokufaka i-propeller yovavanyo lokubhabha, nceda ujonge i-motor steering kunye necala le-propeller kwakhona.Musa ukusebenzisa ikholomu ye-aluminiyam engeyiyo yokuqala okanye ikholamu yenylon ukuze ugweme umonakalo kwi-hardware yokulawula indiza.Umgangatho osemthethweni yikholomu yenayiloni yobungakanani obuqhelekileyo ukuze ilingane ne-flight tower.

Phambi kokuba inqwelo-moya ivulwe, nceda ujonge kwakhona ukuba ufakelo phakathi kofakelo lwe-flying tower luchanekile (ipin okanye ulungelelwaniso lwecingo kufuneka lufakwe), khangela kwakhona ukuba iipali ezidityanisiweyo eziphozithivu nezingalunganga zichanekile, kwaye ujonge ukuba izikrufu zemoto zichasene na. i-motor stator ukuphepha isiphaluka esifutshane.Khangela ukuba ngaba iikhomponenti ze-elektroniki ze-flying tower ziye zakhutshelwa ngaphandle kwe-solder, ezinokuthi zikhokelela kwisekethe emfutshane.Ukuba isiphaluka esifutshane senzeke kwi-welding yokufakela, umthengi uya kuthwala uxanduva.

Iiparamitha zokuchaza:

Imilinganiselo: 20*20*10MM,

Umgama wokulungisa isikruru: 16 * 16MM, umgama womngxuma: M2

Ubungakanani bephakheji: 37 * 34 * 18mm

Ubunzima: 7g Ubunzima bokupakisha: 15g

Ifanelekile kwisakhelo somatshini wokuwela: ubungakanani besakhelo esilandelayo ngaphakathi kwe-70mm ifanelekile (isakhelo se-70mm sinokudlala i-advanteji encinci kodwa epheleleyo)

Ulungelelwaniso olusisiseko lolawulo lwenqwelomoya:

Isivamvo: MPU6000 i-accelerometer ye-axis-three-axis gyroscope (uqhagamshelwano lwe-SPI)

CPU: STM32F411C

Unikezelo lwamandla: Igalelo lebhetri ye-2S

Umanyaniso: LED_STRIP, OSD

I-BEC: 5V / 0.5A

Isihluzi esakhelwe-ngaphakathi seLC, inkxaso ye-firmware ye-BF (F411 firmware)

I-Buzzer/Ucwangciso lwe-LED/ ukujongwa kombane/i-BLHELI yokumodareyitha inkqubo;

Ubumbeko bomamkeli:

Inkxaso ye-Sbus okanye i-serial RX ujongano, Spektrum 1024/2048, SBUS, IBUS, PPM, njl.

I-1, i-DSM, i-IBUS, igalelo lomamkeli we-SUBS, nceda uqwalasele i-RX1 njengojongano lwegalelo.

2, umamkeli wePPM akadingi kuqwalasela i-port ye-UART.

I-2S10A 4-in-1 iiParamitha zokuhlengahlengiswa kwamandla:

I-voltage yokufaka: ixhasa i-1S-2SLipo kunye ne-HV-Lipo

Okwangoku: 10A, incopho ye-14A (ithatha imizuzwana emi-5)

Itshiphu yolawulo oluphambili: SILABS EFM8BB21F16G

Inkxaso: Dshot150 Dshot300 Dshot600 Oneshot125 Multishot PWM

IFirmware: BLHeli_S G_H_50_REV16_7

Imoto ecetyiswayo 1103-1104 ngaphezulu kwe-7500KV

Iimbonakalo:

Ubungakanani obuncinci (ubungakanani bangaphandle buyi-20 * 20mm kuphela), ulawulo lwendiza kunye noxhulumaniso lombane luthatha i-pin ye-brand row, enokufakwa ngokukhawuleza, kunye ne-sensor: i-MPU6000 ulawulo lwendiza luzinzile.